The Zipwake GPU is an optional external 5 Hz GPS antenna that supplies vessel position and speed data when the system cannot obtain a strong GPS signal from another source.
The rugged, fully waterproof receiver supports flush or pole mounting and connects to the EXT GPS port on a compatible Zipwake control panel. Its 5 m cable may be extended to 15 m with approved Zipwake extension cables.
Product Information
| Brand | Zipwake |
|---|---|
| Series | Series S / Series E / Series S PRO / Series E PRO |
| Model | GPU |
| Manufacturer Part Number | 2011240 |
| Product Type | External GPS Antenna |
Key Features
- 5 Hz, 20-channel GPS receiver
- NMEA 0183 / RS232 output
- Flush or pole mounting
- Waterproof IP67 construction
- 5 m cable extendable to 15 m
Specifications
| Operating Voltage | 5 V DC ±5% |
|---|---|
| Power Consumption | 0.28 W, 55 mA average |
| Protocol | NMEA 0183 / RS232 |
| NMEA Sentences | RMC, VTG, GGA, GSA, GSV, GLL |
| Baud Rate | 38400 |
| Update Rate | 5 Hz |
| Channels | 20 |
| Time to First Fix | Hot 6 s; warm 38 s; cold 42 s |
| Operating Temperature | -30°C to +85°C (-22°F to +185°F) |
| Storage Temperature | -40°C to +95°C (-40°F to +203°F) |
| Waterproof Rating | IP67 |
| Compliance | CE, FCC |
| Weight | 0.065 kg (0.14 lbs) without cable and connector |
| Mounting | Flush or pole |
Included
- 1 × GPU external GPS antenna
- 1 × attached 5 m (16 ft) cable
- 1 × mounting kit
Compatibility
Connects to the EXT GPS port of a compatible Zipwake control panel in Series S, Series E or PRO installations.
Installation Notes
- Use when no other strong GPS source is available to the Zipwake system.
- Locate with a clear sky view and use only supported Zipwake extension cables up to a total of 15 m (49 ft).
Important Information
This antenna is optional and does not replace the other control, power or interceptor components required for a complete system.
Features & Specifications
- Manufacturer Part Number: ZW2011240
