The Zipwake AP300-S adapter plate kit simplifies conversion to 300 mm (11.81 in) Series S or Series S PRO interceptors on boats previously fitted with matching BTS interceptors or transoms with protruding bottom plates.
The plates reuse the applicable existing screw-hole pattern, seal previous thru-hull holes and provide the correct mounting interface for the Zipwake interceptor.
Product Information
| Brand | Zipwake |
|---|---|
| Series | Series S / Series S PRO |
| Model | AP300-S |
| Manufacturer Part Number | 2011585 |
| Product Type | Adapter Plate Kit |
| Size | 300 mm (11.81 in) |
Key Features
- Reuses the applicable BTS screw-hole pattern
- Seals previous thru-hull openings
- Supports bottom-plate protrusions up to 15 mm
- Matched pair for a two-interceptor installation
Specifications
| Screw-Hole Pattern | BTS 300 |
|---|---|
| Interceptor Size | 300 mm (11.81 in) |
| Weight | 0.75 kg (1.65 lbs) |
| Maximum Bottom-Plate Protrusion | 15 mm (0.59 in) |
| Maximum Boat Speed | 60 knots |
| Thru-Hull Cable Fitting | Concealed or above waterline |
Included
- 2 × adapter plates
- 2 × O-rings
- 16/24 × screws as specified
- 1 × instruction
Compatibility
For upgrading the matching BTS 300 installation to Zipwake 300 mm (11.81 in) Series S or Series S PRO interceptors.
Installation Notes
- Only new holes for the Zipwake thru-hull fittings should be required when the existing pattern is suitable.
- Verify transom condition, protrusion and hole alignment before mounting.
Important Information
Adapter plates do not include interceptors, servo units or control-system components.
Features & Specifications
- Manufacturer Part Number: ZW2011585
